How to Install Samsung Galaxy J7 (2017) Android 9.0 Pie Firmware with One UI

Samsung’s Galayx J7 (2017) is now getting updated to new Android 9.0 Pie software. This is a major jump for the two year old phone which originally launched with Android Nougat. The device, earlier last year, got updated to Android Oreo and now, it has been stepped up with Android 9.0 Pie. Being a major release, there are loads of new features, functionality and enhancements. There is also inclusion of new One UI skin which is Samsung’s latest software UI meant for larger phones. Gladly enough, you can use the steps ahead to immediately update your Galaxy J7 (2017) to latest Android 9.0 Pie firmware manually.

The J series was developed by Samsung to compete in developing markets and for users who were looking to get the best bang for their buck. Thanks to the overall success of the device, Samsung has granted it extended amount of software support. The device, now, has received two major Android version upgrades. As for the firmware itself, being an official release, it is available through OTA(Over-the-air) update system. However, if you have modified your phone’s system partition with root, custom recovery or your region hasn’t been updated yet, you can use the steps ahead to manually update. Be sure to first create a complete backup. Do note, the ahead given procedure its written to only work with Samsung Galaxy J7 (2017).

Galaxy J7, Android 9.0 Pie, One UI

Disclaimer: Please use this guide at your own risk. We, at TeamAndroid, would not be held responsible if you brick or generally mess up with your device. Further, the firmwares, system files or apps used are property of their respective owners.

Android Pie Firmware Details:

This update is a major one. It carries new Android Pie revision and with that, it also comes with Samsung’s latest One UI software skin. After installing, you would be able to notice all changes immediately.

This firmware tutorial applies to various Galaxy J7 (2017) varaints. The specific model numbers supported through this guide are mentioned ahead.

  • Samsung Galaxy J7 (2017) J730F
  • Samsung Galaxy J7 (2017) J730FM

To make sure you own the correct Samsung Galaxy J7 (2017) model / variant, go to Settings > About phone > Model number.

You might find these following Galaxy J7 (2017) related articles interesting:

If you plan on rooting this phone or are still confused for why to root Galaxy J7 (2017), read: Benefits of Rooting Your Android Device.

Samsung Galaxy J7 (2017) USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy J7 (2017) properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy J7 (2017) USB drivers!

All set and ready? Good. You can now continue reading below and update Galaxy J7 (2017) to Android Pie official firmware update.

How to Install Android Pie on Galaxy J7 (2017)

Ahead, we have a detailed step-by-step procedure through which you can update Samsung Galaxy J7 (2017) to Android Pie build. The firmware is an official one signed by Samsung and we will utilize latest ODIN to flash it onto Galaxy J7 (2017).

Please read every line carefully and make sure you read the tutorial once before actually performing on your device.

ODIN3 v3.09

To Remember:

  • This tutorial is only for Samsung Galaxy J7 (2017). Please don’t try this on any other variants of the phone.
  • Firmwares used in this post are official releases by Samsung for the Galaxy J7 (2017).
  • Make sure you backup all your data in your phone before proceeding.

Complete Step-By-Step Instructions:

Step 1 – Download Android Pie update from the following links for your specific Galaxy J7 (2017) model to your computer and extract the zip file.

Step 2 – Download Odin which will help you to install Android Pie update on Samsung Galaxy J7 (2017).

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Bixby buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Galaxy J7 (2017) USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘AP’ and select file with ‘AP’ in its name.
  • Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
  • Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.

  • AP = PDA
  • BL = Boot Loader
  • CP = Modem

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy J7 (2017) has now been updated to Android Pie firmware update. Go to Settings > About phone to verify.

Backup and Other Important Tips

Please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps.

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. Read: How to Backup Android Apps, Text Messages, WhatsApp, Call History.

Samsung users can also back up data using Samsung Smart Switch to your computer. Smart Switch helps to move data across different Android devices i.e moving Samsung Galaxy S7 Edge backup data to Samsung Galaxy J7 (2017).

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up. [Tutorial: How to Backup Android Phone using TWRP]

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat, Marshmallow, Nougat and Oreo.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

Taimur Akmal
Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Articles: 573

Leave a Reply

Your email address will not be published. Required fields are marked *