Update Huawei P9 Lite with TWRP 3.1.0 Custom Recovery

Update Huawei P9 Lite with TWRP 3.1.0 Custom Recovery 1

Huawei P9 Lite can now be updated with TWRP 3.1.0 custom recovery instead of the usual stock Huawei recovery. This phone is an excellent mid-range phone which comes with a great 13 megapixels camera that takes stunning photos. It comes with 3 GB RAM for smooth multitasking. The battery is 3000 mAh which is enough to last you through a day. Installing a custom recovery will let you do many things. You can install custom ROMs after installing the TWRP, make full backups of the Android system or install mods to modify Android in every way possible.

As you continue below, we’ll get into the tutorial on how to update Huawei P9 lite with TWRP recovery. Just recently, we covered how to install this same recovery on Huawei P9 Plus, and now we have it for the P9 lite phone as well. Huawei P9 lite requires an unlocked bootloader before installing/flashing any custom packages or system mods such as this TWRP recovery. Let’s continue with the tutorial now.


Huawei P9 Lite TWRP 3.1.0 Recovery

Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Huawei P9 lite TWRP 3.1.0 Recovery:

TWRP Recovery will allow you to install custom ROMs, advanced options like formatting the system partition, making backups etc. The entire tutorial has been given on the next page for those who want to install this custom recovery on their phones. Here are a few details about TWRP:

Team Win Recovery Project, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features.

It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

There are some other interesting posts on Team Android, We think you might like the following posts:

If you are planning to root your phone in the future, you might be interested in reading the benefits of rooting your phone.

Huawei P9 lite USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for properly. If not, you can download the latest Huawei official drivers from our Android USB Drivers section here:

Download Huawei P9 lite USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow and Nougat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

4. Your bootloader should be unlocked. See here: How to Unlock Bootloader of Huawei P9 lite.

HOW TO: Install TWRP 3.1.0 Recovery on Huawei P9 lite

We have put together a detailed step-by-step instructions guide on how to install TWRP 3.1 custom recovery on Huawei P9 lite. If you are used to installing custom firmware through TWRP on Huawei devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.


  • Make sure the bootloader of your phone is unlocked.
  • Enable Developer Options by going to Settings > About Phone and tapping on build number multiple times.
  • Enable USB Debugging mode on your phone. [How to Enable USB Debugging]
  • Go to Settings > Developer Options and enable ‘OEM Unlocking’.
  • Backup all the data as installing a custom recovery might delete all of your data.
  • Charge your phone up to 50% first and make sure your phone does not shut down during the procedure or it might damage your phone.

If you have fulfilled all the requirements above, then proceed to the actual tutorial.

Complete Step-By-Step Instructions:

Step 1 – Download Android SDK from the Android Developers website and install. Also, set it up with downloading platform-tools and USB drivers package in SDK. Tutorial given here: How to Set up ADB and Fastboot on Windows.


Step 1 – Download ADB / Fastboot – Android SDK Platform Tools separate package and install on your computer. Download from the following links depending on your OS and extract it anywhere in your computer.

Step 2 – Connect your Huawei P9 lite to your computer using a USB cable.

Step 3 – Download TWRP (twrp_p9_lite.img) and save it into the same directory as the extracted Fastboot / ADB package files.

Step 4 – Navigate to the same directory now as where you have Fastboot (i.e. Step 1) and on Windows: Open Command Prompt (Shift + Right-click > Open Command Prompt). For Mac OS X and Linux, use Terminal to navigate to this directory.

Step 5 – Type in the following command and press Enter.

 adb reboot bootloader

Step 6 – Wait for your phone to boot into Bootloader Mode. You can also enter Bootloader Mode by pressing and holding Volume Up + Power key.

2 responses to “Update Huawei P9 Lite with TWRP 3.1.0 Custom Recovery”

  1. marc Avatar

    I tough i flashed my custom recovery and it says that is finished with no problem but if i go to my recovery the stock recovery is still there. Can someone tell me what i am doing wrong and help me?

  2. Faruk Drkic Avatar
    Faruk Drkic

    can i install this on p9 lite mini ?

Leave a Reply

Your email address will not be published. Required fields are marked *