How to Update HTC Devices with RUU

HTC devices are updated using RUU (ROM Update Utility) EXE files. Whenever a new software update is available for any HTC device, it is downloaded OTA (over-the-air) or you can install the firmware update manually using RUU which is difficult to be found, but when available makes the job very easy.

RUU is available for mostly all the HTC devices and thanks to these ROM Update Utilities, all the flashing and updating work is done by them. You don’t have to mess around with any tools yourself. Let’s take a quick look at how to update HTC phone with RUU.

How to Update HTC Devices with RUU 1

How to Install RUU on HTC Devices

Make sure you have installed all your USB drivers for the HTC device to connect it with the computer. Download HTC USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, unlock bootloader or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

Here are the steps that you need to keep in mind when installing or updating your HTC phone using RUU:

Step 1 – Download the RUU executable file to your computer. For example: RUU_Ville_U_HTC_Europe_1.53.401.2_Radio_0.15.31501S.19_10.12.31501S.06L_release_251412_signed.exe (RUU for HTC One S).

  • Ville – Android phone model code. This is HTC One S.
  • HTC Europe – Firmware region.
  • 1.53.401.2 – Firmware version.
  • 0.15.31501S.19 – Radio version.

Step 2 – Connect your phone to the computer using the USB cable that came with your phone.  Wait a moment for your computer to identify your phone, this may take a few minutes.

Step 3 – After your computer has found your phone, double click on the RUU to start the process.

Step 4 – Follow the on screen instructions to finish flashing the RUU on your phone.

NOTE: If you encounter an error while flashing your phone, it’s possible that the connection to your phone was interrupted.  Simply exit the program, disconnect your phone and start over.

  • Fully exit the RUU to ensure there is no conflict of multiple instances of the program running.
  • Disconnect the USB cable from both the phone and the computer.
  • After a few moments, reconnect the USB to the computer and phone.  See above if your phone or computer cannot find each other.
  • Run the RUU.
Haris Nadeem
Haris Nadeem

Haris lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android. Connect on Twitter: @harisn

Articles: 193


Leave a Reply

Your email address will not be published. Required fields are marked *