Install Samsung Galaxy Note 10 / Note 10+ Official Android 10 One UI 2.0 Update

Samsung Galaxy Note 10 is now getting its stable Android 10 One UI 2.0 update and with this guide, you can update your Note 10 or Note 10 Plus manually to the latest firmware. After its announcement earlier this year, this is the first major software overhaul for Galaxy Note 10 series. Not only does this firmware bring a new Android revision but also comes with a new, revamped User Interface. As with all new updates, Samsung will roll out this one in phases which means some users might get it earlier than others. To get around that, use this guide to manually update your device. Being an official release, flashing this over your phone would not trip Knox.

For our procedure explained ahead, we will be making use of Odin and download mode. If you have ever flashed a firmware on a Samsung device before, this should be very easy for you. If you haven’t, don’t worry as we have everything explained in simple steps along with tips and tricks. Our guide works with both Galaxy Note 10 and Galaxy Note 10+ (exact model numbers listed ahead). Before you start, we recommend a complete backup of your data!

Android 10, Galaxy Note 10, Note 10 Plus

Disclaimer: Please use this guide at your own risk. We, at TeamAndroid, would not be held responsible if you brick or generally mess up with your device. Further, the firmwares, system files or apps used are property of their respective owners.

Galaxy Note 10 Android 10 One UI 2.0 Update Details:

This is the first major software update that the Galaxy Note 10 series is receiving since it was first announced. After installation, users would get to experience new functionality, a new UI and possibly also better performance as well as battery life. From older Android Pie One UI 1.0, the version code has been incremented to Android 10 One UI 2.0 which in itself indicates major changes and refinements.

This firmware tutorial applies to various Galaxy Note 10 varaints. The specific model numbers supported through this guide are mentioned ahead.

  • Samsung Galaxy Note 10 N970F
  • Samsung Galaxy Note 10 Plus N975F

To make sure you own the correct Samsung Galaxy Note 10 model / variant, go to Settings > About phone > Model number.

You might find these following Galaxy Note 10 related articles interesting:

If you plan on rooting this phone or are still confused for why to root Galaxy Note 10, read: Benefits of Rooting Your Android Device.

Samsung Galaxy Note 10 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 10 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 10 USB drivers!

All set and ready? Good. You can now continue reading below and update Galaxy Note 10 to Android Pie official firmware update.

How to Install Android 10 One UI 2.0 Official Stable Firmware on Galaxy Note 10 / Note 10 Plus

Ahead, we have a detailed step-by-step procedure through which you can update Samsung Galaxy Note 10 to latest One UI 2.0 stable update. Do note that this firmware is an official release that has been signed by Samsung and not a custom ROM or a Beta build.

Please read every line carefully and make sure you read the tutorial once before actually performing on your device.

ODIN3 v3.09

To Remember:

  • This tutorial is only for Samsung Galaxy Note 10 variants listed in Step 1. Please don’t try this on any other variants of the phone.
  • Firmwares used in this post are official releases by Samsung for the Galaxy Note 10.
  • Make sure you backup all your data in your phone before proceeding.

Complete Step-By-Step Instructions:

Step 1 – Download latest update from the following links for your specific Galaxy Note 10 model to your computer and extract the zip file.

Step 2 – Download Odin which will help you to install Android Pie update on Samsung Galaxy Note 10.

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Bixby buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Galaxy Note 10 USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

  • Click on ‘AP’ and select file with ‘AP’ in its name.
  • Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
  • Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
  • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
  • Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.

  • AP = PDA
  • BL = Boot Loader
  • CP = Modem

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy Note 10 has now been updated to Android Pie firmware update. Go to Settings > About phone to verify.

Backup and Other Important Tips

Please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps.

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. Read: How to Backup Android Apps, Text Messages, WhatsApp, Call History.

Samsung users can also back up data using Samsung Smart Switch to your computer. Smart Switch helps to move data across different Android devices i.e moving Samsung Galaxy S7 Edge backup data to Samsung Galaxy Note 10.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up. [Tutorial: How to Backup Android Phone using TWRP]

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat, Marshmallow, Nougat and Oreo.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

We would appreciate if you give us a follow on our social handles: InstagramFacebookTwitter and YouTube.

Taimur Akmal
Taimur Akmal

Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.

Articles: 573

Leave a Reply

Your email address will not be published. Required fields are marked *