Here you can find how to update Google Pixel 3 or Pixel 3 XL to latest and stable Android 10 firmware. Recently, Google unveiled Android 10 to the general public. Before this, the brand held a long Beta testing program under the code-name Android Q. And rather than giving it a dessert-inspired complete name, Google has left that tradition and will now only use version numbers to denote releases. If you haven’t received the OTA update yet on your phone or are running system modifications, use this guide to immediately update to Android 10 via fastboot on Google Pixel 3 and Pixel 3 XL.
Some users would already be aware of the changes that Android 10 brings through Android Q Beta builds. However, this final release is stable and shouldn’t have any bugs that were previously found in Beta updates. If you, however, didn’t get a chance to run Beta on your phone, you would notice loads of refinements within Android 10 when you jump over from Android Pie. There is a system-wide dark theme now, new gestures, better security and better overall performance. Before we begin explaining the steps, we recommend that you first backup your phone data just in case your phone gets factory reset-ed.
Disclaimer: All the custom ROMs and firmware, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉
Google Pixel 3 / Pixel 3 XL Stable Android 10 Factory Image Details:
Android 10 replaces Android Pie as the latest iteration of Android. It brings with itself some fundamental changes. Some of these we have mentioned right here:
- Dark Theme (System wide Dark Mode)
- Project Mainline (Updates through Play Store)
- Users will have more control over location / GPS
- Improved privacy protections in Android 10
- Support for fold-able and innovative new screens
- Sharing Shortcuts, Settings Panels and a lot more!
To read more about the full announcements in Android 10, make sure you read our post.
Google Pixel 3 / Pixel 3 XL USB Drivers
You will need to connect the Google Pixel 3 or Pixel 3 XL with the computer – Windows, Mac or Linux. For that, please make sure you have installed the correct USB drivers for these phones properly. If not, you can download the latest official drivers from our Android USB Drivers section here:
Download Google Pixel 3 / Pixel 3 XL USB drivers!
All set and ready? Good. You can now continue reading below and update your Google Pixel 3 / Pixel 3 XL to Android 10 factory image.
Install Stable Android 10 on Google Pixel 3 / Pixel 3 XL Using Official Factory Image
We have put together a detailed step-by-step instructions guide on how to install the official Android 10 on Google Pixel 3 / Pixel 3 XL using the factory image provided by Google. This tutorial is for beginners who are not used to playing around with official factory images by Google on the Pixel phones.
Please make sure your phone fulfills all the requirements and you read the entire tutorial once before actually performing it on your device.
Disclaimer: Try this on your own risk. We are not responsible if you mess up with your Google Pixel 3.
Just To Remember:
- This tutorial is only for Google Pixel 3 and Google Pixel 3 XL phones.
- Your phone can be on any previous Android version or even on a custom ROM. It doesn’t matter at all. This tutorial will still work for installing Android 10.
- Enjoy Android 10 on your device and let us know your review about it!
NOTE: Installing Android 10 factory image will WIPE / DELETE / ERASE everything from your phone even if your bootloader is still locked or already unlocked. Please make sure you have a backup of all the data. Read: How to Backup Android Apps and Other Data.
Complete Step-By-Step Instructions:
Step 1 – Download Android 10 factory image for your Pixel 3 or Pixel 3 XL on your PC, if you haven’t already.
- blueline-qp1a.190711.020-factory-b5633fdf.zip – Google Pixel 3
- crosshatch-qp1a.190711.020-factory-2eae0727.zip – Google Pixel 3 XL
Step 2 – Connect your Google Pixel 3 / Pixel 3 XL to your computer using the USB cable.
Step 3 – Please make sure Fastboot is configured and properly installed on your computer. How? See here: How to Set Up ADB and Fastboot with Android SDK.
Step 4 – Turn OFF your phone.
Step 5 – Get into the Fastboot / Bootloader Mode on your phone. Turn ON the phone while pressing and holding the Volume Up + Volume Down + Power buttons till you see the Fastboot menu and START on top.
Step 6 – Now extract the downloaded file anywhere in your computer. Go to the folder blueline-qp1a or crosshatch-qp1a and then copy/paste all the files to your Fastboot directory.
Note: If you followed our tutorial on setting up Fastboot on your computer, there is a 99% chance your Fastboot directory will be the platform-tools folder in your Android SDK directory.
Step 7 – From the factory image files in your Fastboot directory, do the following depending which OS you are on:
- On Windows: Run the file “flash-all.bat”.
- On Mac: Run the file “flash-all.sh” using Terminal.
- On Linux: Run the file “flash-all.sh”.
Step 8 – That’s pretty much that you had to do for flashing the Android 10 factory image on your Google Pixel 3 / Pixel 3 XL. Now wait and watch as the process is completed — or follow the on-screen instructions on your phone if in case you have to unlock the bootloader.
Step 9 – After the installation completes, the phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait with patience!
That’s it! Your Google Pixel 3 phone should now have the official Android 10 software update installed on your phone using the stock factory image from Google! Go to Settings > About phone to verify.
Backup and Other Important Tips
Please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps.
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. Read: How to Backup Android Apps, Text Messages, WhatsApp, Call History.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up. [Tutorial: How to Backup Android Phone using TWRP]
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow, Nougat and Oreo.
2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend not to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
Enjoy and have fun exploring the new Android 10 firmware update. We have made sure to explain the complete process in detail, however, if you run into problems, do get in touch with us through Facebook or Twitter!