Samsung Galaxy S20 TWRP is now available and you can install it on your Galaxy S20, S20+ and S20 Ultra using this guide. Galaxy phones, especially flagships such as the S20, are always popular with developers and this is why we have a TWRP build available so early on. Once installed, users will then be able to root, flash custom ROMs and do more system mods on their Galaxy S20 series devices.
Since TeamWin updated TWRP custom recovery’s code base to support Android 10, it was relatively easy for developers to port over a build to Galaxy S20. Once installed on Samsung Galaxy S20 / Galaxy S20+ or Galaxy S20 Ultra, enthusiasts will have access to all TWRP features; popular ones being the ability to flash custom ROMs and root.
Samsung Galaxy S20 TWRP Recovery
Custom recoveries utilize Android’s built-in recovery paritition which is dedicated towards installing updates, factory resetting the phone and other maintainence that can’t be done while the system is running. In addition to these basic functions, custom recoveries like TWRP allow for flashing of custom ZIP files, advanced partition wipes and more.
TWRP acts as a fundamental gateway for other system modifications. Most custom ROMs, root packages and mods that you will come across will be designed to work with TWRP.
Download Galaxy S20 TWRP Custom Recovery
Here you can download the Galaxy S20, S20 Plus and S20 Ultra TWRP IMG file. For installation steps, we have explained that ahead.
| Download | TWRP_S20_S20_S20Ultra_ATBG.tar |
| TWRP Version | TWRP 3.4.0 |
| Release Type | Unofficial |
| File Size | 51.1MB |
For now, this is an unofficial release. However as soon as TeamWin releases an official build, we will update this article.
How to Install TWRP Recovery on Galaxy S20 / S20+ / S20 Ultra
Make sure you have gone through our unlock bootloader guide before implementing this tutorial.
Step 1 – Extract Odin tool to any location on your computer. Here is our download hub for Odin: Download Odin Tool (All Versions)
Step 2 – Download S20_N20_Encryption_Disabler.zip file and copy it over to the your phone.
Step 3 – Power off your phone and reboot into download mode. To do so, connect a USB type-C cable while holding volume up and volume down while the phone is powered off.
Step 3 – In Odin’s AP field, select the TWRP TAR file and click on flash.
Step 4 – While Odin is flashing, press volume up and power button.
Step 5 – TWRP should boot and from here, do a factory reset and then flash the ZIP file you downloaded in Step 2.
That’s it, your Galaxy S20 / S20 Plus / S20 Ultra should have TWRP installed. Next, you can use it to flash Magisk for root!
