Install Huawei P20 Pro TWRP Custom Recovery

Step 7 – Once your phone is in Bootloader Mode, type in the following command and press Enter.

fastboot flash recovery_ramdisk twrp-3.2.1-0-charlotte.img

Step 8 – Finally enter the following command and press Enter.


That’s it! the TWRP recovery is now installed on your Huawei P20 Pro.

How to Access TWRP 3.2.1 Recovery on Huawei P20 Pro:

After you are done with the installation side of TWRP 3.2.1 recovery, follow these steps to access it on your Huawei P20 Pro.

Step 1 – Turn OFF your phone.

Step 2 – Now press and hold the Volume Up button along with the Power Button for few seconds.

Step 3 –  You should let go of the power button as soon as the Huawei logo pops up. The phone should now boot into Recovery mode.

Having issues? Read our dedicated guide on how to access recovery partition on Huawei P20 Pro.

There are some other interesting posts on Team Android, We think you might like the following posts:

Backup and Other Important Tips

Please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow and Nougat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

4. Your bootloader should be unlocked. See here: How to Unlock Bootloader of Huawei P20 Pro.

You may also like to check out our Huawei P20 Pro section for official firmware updates, custom ROMs, tips and other tutorials.

Default image
Taimur Akmal
Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.
Articles: 1155

Leave a Reply