Default Featured Image

How To Root Huawei P8 on Stock Android 5.0 Lollipop Firmware

A complete guide on how to root Huawei P8. Just a couple of days back, we published how to unlock the bootloader on your Huawei P8 and install ClockworkMod custom recovery. In this post we will cover how to root Huawei P8 on the stock Android 5.0 Lollipop firmware. We will use Chainfire’s latest SuperSU app package in addition to the custom recovery we installed. By using ADB shell, we will manually copy and flash the package. This way you can enjoy all of the root apps and system mods on your Huawei P8.

As you read further, we will guide you how to backup your important data, some other important tips and then tell you how to root Huawei P8 with complete steps. We will use ClockworkMod recovery as our custom recovery and SuperSU as our rooting package. For more details, continue reading. Let’s get on with the tutorial now.


Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Root Huawei P8 Details:

This tutorial will be covering all the latest firmwares available for the Huawei P8. As there are no system version dependencies, the only thing you need to confirm before applying this tutorial is the model of your smartphone.

Meanwhile, you should also check out the following articles:

The method to root Huawei P8 has been explained with instructions on the next page. In case you have problems connecting your phone with the computer, make sure USB drivers are properly installed and read the tips below.

Huawei P8 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Huawei P8 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Huawei P8 USB drivers!

NOTE: If you are experiencing issues while connecting to custom Recovery or ADB shell, please install Universal ADB drivers from Koushik.

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean, KitKat and Lollipop.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend not to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. You can now go to the next page and root Huawei P8 with the given step-by-step tutorial.

Default image
Taimur Akmal
Devoted writer, enjoys developing code. Appreciates excellent food, exceptional coffee and great company. He is also into sublime design and nicely built cars.
Articles: 1155


  1. I’d also be interested if this works on a P8 lite the same way? Did anybody have any success with this manual?

  2. BEWARE!! TYPO in the TUTORIAL!! The command “/sbin/recovery –update_package=/” is actually “/sbin/recovery –update_package=/” → 2 short hyphens, not a long one!

Leave a Reply